MD MIX Aluminium
MD MIX Aluminium, blister card
item number/unit
MIX.A.56 unit 24
MIX.A.56-BK unit 10
MIX.A.115 unit 12
MIX.A.56 unit 24
MIX.A.56-BK unit 10
MIX.A.115 unit 12
- product description
- data sheets
MD MIX ALU
For quick repairs of transmission housings, boat and professional engine-building.
- Fills cracks and holes
- Temperature resistant up to +180°C and up to +300°C for short periods
- For on-the-spot repairs
MD MIX is easy to use. The material is worked like modelling clay. MD MIX has an extremely high Shore hardness D of 80 (concrete 60). MD MIX can be worked mechanically.
Working instructions:
The parts to be repaired have to be clean and free of oil and grease. Roughening increases the strength of the bond. Cut off the required quantity of MD MIX and knead it for approximately 2 minutes until an even color has been produced and the material
becomes warm. Then apply MD MIX to the parts and mould it. Mechanical working can be done after approximately 20 minutes. Final hardening occurs after 24 hours. Do not work at outdoor temperatures below +5°C.
Application examples:
Repairing incorrectly drilled boreholes, holes in pipes, cavities and all cracks in metal, wood and plastic. Mechanical working is possible after a short time. Parts can be ground, milled, bored and painted over.
MIX Alu technical data